Are there pipes in wall behind toilet?
If you are going to hand something over a sink or a toilet , then there is a good chance there will be pipes in those walls . But if you are on the 2nd floor, probably not. Second, the pipes are usually not right against the drywall anyway, so unless you are using really long fasteners, you probably won’t hit one.
Can a toilet and shower share the same drain?
Here’s the longer answer: Your shower and toilet most likely share a drain line and a vent stack (this setup is called wet venting, more on that later). If either the line or the stack has a clog or blockage, air is forced either up or down your toilet , making the gurgling noise you’re hearing.
How many inches should a toilet be from the wall?
What does 12 rough in mean for toilet?
The toilet rough -in refers to the distance from the finished wall to the center of the toilet’s floor drain or waste outlet. Most toilets have a rough -in of 12 inches, although it’s not uncommon for older homes to have an unusual size such as 10″ or 14″.
How can you tell if you hit a stud?
Make a fist and knock on the wall with your knuckles. In some places, you ‘ll hear a hollow sound. Other areas will sound more “solid.” The “solid” sound indicates you have knocked on a stud . Studs are located about 16 to 24-inches apart.
How do you know if there is plumbing behind a wall?
But there are usually some subtle signs to help you identify these types of leaks, including: Mold or mildew. Mold thrives in moist, dark areas, which are typically hidden behind walls or under flooring. If a pipe springs a leak, mold can begin to grow in the area.
Are kitchen and bathroom pipes connected?
Tuesday, January 9th, 2018. Your kitchen sink and bathtub have separate drain lines, but they ultimately all connect to a single line that leads into the sewer. It is important to know how your plumbing drains work and how your sink backs up into your bathtub before the problem happens.
What are plumbing drawings called?
A plumbing drawing , a type of technical drawing , shows the system of piping for fresh water going into the building and waste going out, both solid and liquid. Mainly plumbing drawing consist of water supply system drawings , drainage system drawings , irrigation system drawings , storm water system drawings .
What is a plumbing riser diagram?
The point of a plumbing riser diagram is to separate out plumbing systems for potable water, waste water, storm water, sewage, and so on to be able to identify exactly where the different piping is located and what it is attached to in terms of appliances, drains, other building systems, and so on.
When I flush my toilet it comes up in my shower?
Several plumbing fixtures are clogged at the same time. If your toilets , kitchen sink and tub or shower are all backed up , you probably have a clogged sewer line. When you flush the toilet , water backs up into or comes up in the tub or shower . When your sewer line is clogged, the water can’t go down the drain .
What happens if you poop in the shower?
Rob tells Metro.co.uk: ‘ If we were to regularly defecate in the shower , this could lead to issues with plumbing and drainage further down the line. ‘ Showers don’t have enough pressure or volume of water for bowel movements to pass through drainage systems.
Can a toilet drain be 2 inch?
Systems with less than nine units on one stack can use a 2 – inch pipe, unless there is a toilet discharging into the piping. If that’s the case, it must be a minimum of 3 inches . The stack discharges into the main drain pipe.