Toilet diagram plumbing

What are parts of toilet called?

There are really only two main toilet tank parts : The toilet flush valve, which lets water gush into the bowl during the flush, and the fill valve, which lets water refill the tank after the flush.

Can two toilets share the same drain?

The vertical pipe that leads from a toilet to the sewer is called the soil stack. Most houses have more than one toilet , and if they are on the same side of the house, their waste lines can usually tie into the same stack. If they are on opposite sides, however, each may need its own stack.

How do toilet pipes work?

As water flows into the toilet bowl, it rises beyond the top level of the trap, thereby moving through the drain pipe . The drain pipe is filled up as the flush water flows into the bowl, thereby creating a suction that forces the bowl to empty its contents.

How do I know if my toilet is a 10 or 12 rough?

If your toilet has four bolts rather than the standard two, you’ll measure to the center of the rear bolts. The standard rough -in measurements are 10 , 12 and 14 inches. If your measurement is in between these intervals, round your number down to the nearest standard measurement.

How many inches should a toilet be from the wall?

15 inches

What’s the bottom of the toilet called?

Flush Valve This is the plastic or metal part sitting at the bottom of the tank, forming the opening through which water drops out of the tank and into the toilet bowl when a flush is initiated. The flush valve is usually connected to the vertical overflow tube as part of one-piece construction.

You might be interested:  Plumbing check valve

What is the pipe under the toilet called?

In plumbing, a closet flange (also known as a toilet flange ) is a pipe fitting (specifically, a type of flange ) that both mounts a toilet to the floor and connects the toilet drain to a drain pipe . A wax ring is used to seal the gap between the flange and the bottom of the toilet .

Are toilet tanks interchangeable?

While there are a few models that can interchange tanks and bowls, most are configured to work optimally as a set as indicated in our Product Showcase. In fact, if you do your own mixing and matching, the toilet may not flush at all! Gravity Fed and Pressure Assisted tanks and bowls cannot be mixed.

How many toilets can 1 stack?

2 Toilets

What happens if plumbing is not vented?

Poorly- vented drain lines will not be able to effectively move wastewater and solid waste out of your building. This could lead to problems such as overflowing drains, backed-up toilets, and similar plumbing issues.

How far can a toilet be from the soil stack?

Tie the waste line from the new toilet directly into the stack if the toilet is within six feet of the stack and the waste line is 3 inches in diameter. If the waste line is 4 inches in diameter, the toilet can be as far as 10 feet from the stack .

Are toilet and sink drains connected?

Sewer Drain Basics This main sewer drain pipe under the yard is connected to the main drain inside the house, which accepts the wastewater from the individual branch drains serving each plumbing fixture, including sinks , tubs, showers, and toilets , as well as the washing machine.

You might be interested:  Plumbing a water heater

Why is the toilet tank empty?

The most common cause for this problem, and the one that’s easiest to fix, is a poorly seated flapper, aka a running toilet . The flapper is that part of the toilet tank that opens to let water flow into the toilet bowl, and then flaps down over the opening to allow the tank to refill.

Are there pipes in wall behind toilet?

If you are going to hand something over a sink or a toilet , then there is a good chance there will be pipes in those walls . But if you are on the 2nd floor, probably not. Second, the pipes are usually not right against the drywall anyway, so unless you are using really long fasteners, you probably won’t hit one.