Rigid plumbing snake

What is a plumbing snake called?

A plumber’s snake or drain snake is a slender, flexible auger used to dislodge clogs in plumbing . The plumber’s snake is often reserved for difficult clogs that cannot be loosened with a plunger. It is also sometimes called a toilet jack.

Is snaking a drain hard?

Snakes are much more powerful drain -clearers than plungers, but they’re also slightly riskier to use. If you use your plumber’s snake improperly, then you might tear up your pipes or even create leaks. To avoid doing that, it’s important to know how your snake works and how to use it correctly.

Do I need a 3 foot or 6 foot toilet auger?

A toilet auger is a tool that is designed to funnel itself through a toilet’s trap-way, to remove any obstruction or clog. If you have a 3ft toilet auger you can reach blockages about 2ft into the waste line, if you’ve invested in a 6ft toilet auger (Recommended) you can reach blockages about 5ft into the waste line.

How do you unclog a toilet with an electric snake?

Using a cordless drill attachment on the top of the electric snake , begin to pull the trigger on the drill, slowly at first, which will feed the cable into the drain. Use a bit of force to get it down the drain. Once you start to feel resistance, then you’ve reached your clog.

Can you run a snake through a toilet?

To unclog toilets that couldn’t be fixed with a plunger, use a toilet auger. Also called a plumbing snake , this flexible coil of wire is designed to extend into pipes and clear obstructions without damaging the plumbing. Feed the end of the cable into the toilet , taking care not to scratch the bowl.

You might be interested:  Plumbing piping

Can you break a pipe with a snake?

Drain Snakes Can Damage Pipes Old pipes in many homes are galvanized, or coated in zinc, which was done to prevent the pipe from rusting or corroding. When a drain snake is inserted into a pipe , the end may flop around, scratching the pipe .

What to do if snake broke in drain?

Retrieving Broken Snake On Your Own Try Snagging the Snake with a Retrieval Tip. The first option would be to try to snag the broken snake with a larger snake that has a snake retrieval tip (it kind of resembles a corkscrew that has expanded). Excavate. Contact the Professionals.

How long does it take to snake a drain?

five minutes

How do you straighten a drain snake?

How do you straighten a plumbing snake ? Fill the sink with water as this will aid in breaking through the blockage as well as help prevent the cable from kinking. Back the snake out of the pipe very slowly. Remove the cable from the pipe. Jam the drain snake cable completely through the blockage by using a steady up-and-down motion.

What acid do plumbers use to unclog drains?

Hydrochloric acid

How do you unclog a drain without a snake?

10 Really Easy Ways to Unclog Drains The Bent Wire Hanger. Simple enough, but surprisingly effective. Baking Soda and Vinegar. Mix 1/3rd of a cup of baking soda with 1/3rd of a cup of vinegar in a measuring cup. The Wet & Dry Vacuum. Boiling Water. Caustic Soda. Cleaning the Pipe. The Drain Snake . Salt and Baking Soda.

What chemical do plumbers use to unclog drains?

Liquid formulations of corrosive alkaline drain cleaners can contain sodium hypochlorite (bleach) and lye ( sodium hydroxide or potassium hydroxide) in concentrations up to 50 percent. Other corrosive mixtures come as two-part cleaners that are mixed as they are poured in the drain opening.