Plumbing pipe curtain rod

How do you put a curtain rod in a pipe?

DIY Curtain Rods Tutorial Pipe Supplies. Tools Required. Step 1 – Remove Grease From the Pipe . Step 2 – Prime the Pipe for Spray Paint. Step 3 – Paint the Pipe . Step 4 – Assemble the Pipe Curtain Rod . Step 5 – Attach the Pipe Flanges to the Wall. Step 6 – Attach the Pipe Curtain Rod .

How do you make an industrial pipe curtain rod?

Making your DIY industrial pipe curtain rod Clean grease and stickers off piping . Connect pipes with the union jack iron fitting. Connect the female ends of the 90-degree elbow joints to both ends of the pipe . Connect both floor flanges to the male ends of the 90-degree elbow joints.

Can you put two sets of curtains on one rod?

Another smart way to achieve a layered look using a single rod is to use double-sided hooks. Though these are often used in bathrooms for shower curtains , they can be adopted in other rooms as well. Double-sided hooks have two hooks on opposite sides, which can be used to hold two curtain panels at the same time.

Do it yourself curtain rods?

To put together the DIY curtain rod featured here you need two wood brackets, a long wood dowel, a saw, a drill, sandpaper, wood stain, warm gray chalk paint , dark wax and dowel caps (these are optional). If you prefer something sturdier than wood you could use a metal rod instead of a dowel.

How do you make a curtain rod out of copper pipe?

How to make copper curtain rods from copper pipe : Use pipe cutter according to instructions to cut pipe to desired length (I usually do ~1′ wider than the window) Use a sanding block to smooth cut edges. Apply a tiny bit of epoxy to the ends of the pipe and put the caps on.

You might be interested:  What is pex plumbing pipe

How do you make a curtain rod out of electrical conduit?

We used these. Step one: gather your supplies. Step two: Cut conduit to size. Step Three: Connect your conduit . step four: Add knock out seals. step five: Hang your new DIY curtain rods !

Can I use PVC pipe for curtain rod?

PVC pipes pair well with wall hooks or drapery rod brackets. If you want to add decorative finials, insert a cork at each end of the hollow tube to help connect screw-in or pushpin finials, for example. To make returns on either side of the curtain , connect PVC elbows at each end to create 90-degree angles to the wall.

What can I use instead of a curtain rod?

An old piece of fence or a coatrack that you don’t use any longer is a great way to create your own DIY curtain rod . Just take a section of fence or rack and hang a few hooks on it to hold your curtains . This is a great rustic décor idea and a really cheap one, too.

How do you support long curtain rods?

How to Reinforce Extra- Long Curtain Rods Use heavy-duty material for your curtain rod , especially if you’re hanging multiple panels or drapes. If you have traditional curtain rod brackets, try adding a drywall anchor for reinforcement. If you have plaster walls, consider using longer screws that don’t fall out.

Do you need two curtain rods to hang a valance?

We recommend using two single curtain rods of 1″ – 2″ in diameter: the top one is for the valance with swags and tails, and the lower one for the two curtain panels. This way, you have more flexibility in adjusting height, width and projection (distance from the wall).

You might be interested:  Plumbing vent valve

How do you hang sheer curtains without a rod?

Coat Hooks To install them, intersperse the coat hooks at an even distance across the window. Loop the holes through each hook to hang your curtains . Coat hooks are easier to hang than traditional curtain rod hardware and don’t require drilling.

Why do curtains have two rod pockets?

Valences hung above the curtain hide the rod even when the curtain is open. Sheers can be mounted under the main panels. Rod pocket curtains are more difficult to open and close because the material doesn’t slide easily along the rod . Rings or pin hooks make adjusting curtains easier.