Pegasus plumbing parts

Where can I buy Pegasus faucet parts?

Home Depot

How do you fix a leaking Pegasus bathroom faucet?

How to Repair a Leaky Single-Handle Cartridge Faucet 01 of 09. All Single-Handle Cartridge Faucets Have a Similar Design. Turn Off the Water Supply. Remove Faucet Lever Handle. Remove the Retaining Nut. Remove the Cartridge Retention Clip. Remove the Old Cartridge. Purchase the New Cartridge. Reassemble the Faucet .

What are the names of the parts of a faucet?

About Faucet Parts Stems and cartridges. Faucet handles. Valve trim. Bathtub spouts. Showerheads and hand showers. Shower arms and wall mounts. Faucet hardware. Gaskets and O-rings.

How do you remove a Pegasus shower handle?

Locate the cover on the handle of the Pegasus faucet and take it off by prying it up with your fingers. Set the part aside. If the part does not com up easily, use the edge of a knife to pry it up. Unscrew the retaining screw, located on the top of the handle right in the center, with a Phillips screwdriver.

Is Pegasus a good brand of faucet?

Pegasus is known for emphasizing innovation in their line of kitchen faucets . As a result, their kitchen faucets always fuse classic, traditional style with modern functionality, making them a great choice when you’re trying to upgrade your kitchen’s look and function.

How do I remove a faucet cartridge?

TURN OFF WATER. Turning off the water at the shut off valves under the sink. PRY OFF HANDLE. Pry off the handle cap using a small flat screwdriver. REMOVE HANDLE FROM ASSEMBLY. REMOVE THE RETAINING NUT. REMOVE THE RETAINING CLIP. REMOVE THE O-RING. REPLACE THE CARTRIDGE . REINSTALL THE O-RING.

You might be interested:  Seal tape plumbing

What’s the inside of a tap called?

Your internal stop tap (also sometimes called a stop valve or stopcock) is the point where you can shut off the water supply to your home or business. It looks like a spout-less tap or lever and sits between two lengths of pipe acting as a connector.

What are the three parts of a faucet?

Anatomy of a kitchen faucet (diagram) Adjusting Ring: A seal that can be made out of various materials and used to ensure that the faucet’s joints are watertight. Spout Assembly: Parts used to control the spout . Faucet Lever: Lever used to control turn tap on and off. Spout : The opening where water flows out of.

What is the top part of a tap called?

Names of Water Tap Parts Handle. The handle is used to turn the tap on to allow the flow of water and to shut if off. Bonnet Nut. The bonnet nut screws onto the stem of the tap , giving a place to attach the handle via a small screw. Stem and Packing. Washer. Valve Body and Valve Seat.

How do single handle faucets work?

Handle . When it comes to the faucet handle , which opens and closes the valve, your choices are one or two. The single handle is easy for people of all ages and abilities to use. It can be mounted on top of the spout, on either side of it, on the front, or beside it, requiring a separate hole .

How do single handle shower faucets work?

To operate a single – handled shower faucet , you either pull out the faucet handle to start the water flow, then turn the handle to adjust the temperature, or you turn the faucet to start the water flow.

You might be interested:  Plumbing rental supplies

How do you repair a Pegasus kitchen faucet?

Instructions Remove the handle assemblies. Pop out the screw caps on the top of each handle with your fingers. Remove the Pegasus faucet cartridges. Install the new Pegasus faucet cartridges. Reinstall the handle assemblies. Test the faucet’s operation and check for leaks.