How to take jeep doors off

What tool do you need to take Jeep doors off?

Removing the Doors . Remove the nuts on the bottom of each bolt. At the bottom of each of the two bolts that hold each door on the vehicle, there are nuts that must be removed in order to take the doors off of your Jeep . Use a 13 millimeter socket and wrench to remove these nuts.

How do you take the doors off a Jeep Wrangler 2020?

Using the #T50 driver, remove the hinge pin screws from the underside of the lower and upper side door hinges. Place the screws securely in the dedicated screw bolt tray. Just underneath the instrument panel, you’ll find the door for wiring access. Open it by sliding the cover straight back and then detach the tabs.

Is it safe to take the doors off a Jeep?

It is completely legal to remove your Jeep doors and drive on public roads without them, as long as you are sure to take care of a few minor things first. When you remove your Jeep doors , you will also be removing the mirrors. In order to remain in compliance with state laws, you must re-attach your mirrors.

What size bit Do I need to remove Jeep doors?

the t40 is the torx bit size listed for the jeep jk door.

Why won’t my Jeep doors come off?

Unplug the wiring harness inside, then pull the door strap away from the hook. Lift the rear door straight up to unhook the door from the hinge. Try taking a rubber mallet and tapping on the bottom of the door near the hinge. They are probably just stuck from never being removed before.

You might be interested:  Exterior metal sliding barn doors

Can you drive a Wrangler without doors?

Yes, it’s perfectly legal to drive your Jeep on the road with all of your doors removed. You won’t get stopped for having your doors off in spite of all the rumors that you ‘ve heard; however, that doesn’t mean you won’t get stopped at all.

What size Torx Do I need to remove my jeep top?

the torx bit that fits the jeep wrangler hard top is the t40.

Where is the Jeep tool kit?

The little storage compartment in the back lift up the cargo floor and holes are pre-made and labeled within the plastic tray located underneath. The Jeep tool kit also includes an on-hand instructions guide with pictures and labels.